mining sublevel method


  • Underground mining (hard rock) - Wikipedia

    Cut and fill mining is a method of short-hole mining used in steeply dipping or irregular ore zones, in particular where the hanging wall limits the use of long-hole methods. The ore is mined in horizontal or slightly inclined slices, and then filled with waste rock, sand or tailings .


  • Stoping - Wikipedia

    Stull stoping is a form of stoping used in hardrock mining that uses systematic or random timbering ("stulls") placed between the foot and hanging wall of the vein. The method requires that the hanging wall and often the footwall be of competent rock as the stulls provide the only artificial support. This type of stope has been used up to a depth of 3,500 feet (1,077 m) and at intervals up to ...


  • Underground mining techniques - Universidade Federal do ...

    Underground Mining Methods and Applications Production Headframe Hans Hamrin* 1.1 INTRODUCTION Ore is an economic concept. It is defined as a concentration of minerals that can be exploited and turned into a saleable product to generate a financially acceptable profit under existing economic conditions. The definition of ore calls for afterthoughts. Ore does not properly exist until it …


  • sublevel caving mining method - kodim0604-karawang.com

    2018-06-20· Our company's main products include gas&oil-fired boiler, coal-fired boiler, biomass boiler, thermal fluid heater and other series with more than 400 varieties of specifications.


  • Sublevel Caving Mining Method - Newtrax Technologies Inc.

    Sublevel Caving . Sublevel Caving is one of many different methods for underground hard rock mining. It is a large-scale mining method suitable for large ore bodies with a steep dip and a rock mass with a host rock in the hanging wall will fracture under controlled conditions.


  • (PDF) Underground mining Methods - ResearchGate

    c) Unsupported, supported and caving underground mining methods Hard rock under ground mining methods can be classified as the follo wing:- Hard rock Mining Me thods


  • Cave Mining - Today's Challenges - SRK

    The industry perception is that sublevel caving is a "dirty mining method" (i.e. high dilution and low recovery). However, there were several successful sublevel cave mines executed in the past. The success of a sublevel cave mine is not by chance - they are engineered to perform.


  • Sublevel caving | Britannica.com

    In mining: Sublevel caving. This method owes the first part of its name to the fact that work is carried out on many intermediate levels (that is, sublevels) between the main levels.


  • Sublevel stoping..Underground mining methods - SlideShare

    Sublevel stoping..Underground mining methods 1. Hassan Z. Harraz [email protected] 2014- 2015 This material is intended for use in lectures, presentations and as handouts to students, and is provided in Power point format so as to allow customization for the individual needs of course instructors.


  • sub level mining method - ellul.nl

    sublevel caving mining method - crusherasia.com. A New Mine Planning Tool for Sub Level Caving Mines · PDF . the feasibility of mining using the sublevel caving method.Much of the logic in the module is similar in concept to that used in Gemcom PCBC for Block Cave operations.


  • Cut and Fill Mining Method 101 - Newtrax Technologies Inc.

    Cut and Fill mining is a favored choice for steeply dipping and sometimes irregular ore bodies and preferred by mines that require the capability of selective mining and adaptability to variations in the rock mass. Cut and Fill mining is generally referred to as a small-scale mining method. Mining is carried out in horizontal slices along the ore body, where the bottom slice is mined first ...


  • Underground Mining Methods — New Pacific Metals

    Sublevel Longhole. This bulk underground mining method involves mining large amounts of material from a single stope – similar to cut and fill, this method starts at the bottom of a level and moves upward. Ore is removed from the bottom, and then more ore is blasted from a higher level that falls to the same level to be removed, with the process repeating up the orebody. The supporting walls ...


  • Types of Underground Mining Method Comparison

    This method, otherwise referred to as sublevel drifts and back, caving, or sublevel slicing, resembles top slicing in that the orebody is worked from the top down, …


  • SUBLEVEL CAVING TECHNIQUE by Partha D Sharma -

    Sublevel caving techniqueSimplicity and low cost are the essence Development volume to prepare sublevel caving is extensive, compared to other mining methods.


  • (PDF) Sublevel Stoping Underground Mining Methods

    The Atud gold mine, central Eastern Desert of Egypt, is located in an intrusive metagabbro-diorite complex that abutts the conglomerate-greywacke-slate series of the Pan-African Belt in Egypt.


  • Sub Level Caving - YouTube

    2007-03-22· A method of underground mining operation. ... Mount Meru: Climbing the Shark's Fin | Op-Docs | The New York Times - Duration: 6:52.


  • sub level mining method - dublinvacationrentals.eu

    Methods of Underground Mining . This review describes the methods of underground mining and offers several useful links Sub-level caving operations for gold extraction in the Abitibi region of


  • Description of mining methods (step by step) - nvp-pgf.org

    Primary Mining Method Sub-Level Longhole retreat. Information. DEVELOPMENT SEQUENCE The Diamond hill ore bodies and mine workings are in exceptionally solid unfractured rock and accordingly are amenable to low cost sublevel open stoping methods.


  • Design and Application of Sublevel Stoping Methods ...

    Introduction. This course refers to the generic mining method of sublevel stoping. The most commonly used sublevel stoping mining methods are sublevel open stoping, long-hole open stoping or blasthole stoping, and vertical crater retreat (VCR).


  • Stoping Mining Methods - Metallurgist & Mineral …

    Mining by Sublevel Caving. In sublevel caving, relatively thin blocks of ore are caused to cave by successively undermining small panels. The ore body is developed by a series of sublevels usually spaced at vertical intervals of 18 to 25 or 30 feet (more recently, intervals of 50 feet or more have been


  • mining sublevel cut - perkinspreschool.com

    2018-01-23· Cut-off Grade Based Sublevel Stope Mine Optimization: Introduction . Dec 18, 2013 Cut-off Grade Based Sublevel Stope Mine Optimization: Introduction and evaluation of an optimization approach and method for grade risk


  • Sublevel caving - QueensMineDesignWiki

    Sublevel Caving is one of the most advanced mining methods. This method is usually undertaken when mining the orebody through an open pit is no longer economically viable.


  • Underground Mining Methods and Equipment

    stoping, cut-and-fill, longwall mining, sublevel caving, and block caving. The second section describes underground mining equipment, with particular focus on excavation machinery such as boomheaders, coal cutters, continuous miners and shearers. 1. Underground Mining Methods 1.1. Classification of Underground Mining Methods Mineral production in which all extracting operations are conducted ...


  • sub level stoping - ellul.nl

    Description of mining methods (step by step) - nvp-pgf.org. Primary Mining Method Sub-Level Longhole retreat. Information. DEVELOPMENT SEQUENCE The Diamond hill ore bodies and mine workings are in exceptionally solid unfractured rock and accordingly are amenable to low cost sublevel open stoping methods.


  • Sublevel Stoping - RitchieWiki

    Sublevel stoping is a method of underground mining method that involves vertical mining in a large, open stope that has been created inside an ore vein


  • Sublevel Caving Technique | Mining | Economic Geology

    Sublevel Caving Technique - Free download as PDF File (.pdf) or read online for free. An underground mining method used in large, steeply dipping orebodies where the wall rock is of an incompetent nature. Parallel drives are developed in the ore on equally spaced levels. The ore is then drilled and blasted using longholes between levels, often ...


  • Sublevel Stoping - YouTube

    2009-07-09· Category Education; Song "My Shooter" (Long Edit) Artist Groove Cutter; Album Annex Trax Vol. 11; Licensed to YouTube by NATOarts (on behalf of Track One Recordings); AMRA, ASCAP, and 15 ...


  • Block Caving Method Of Mining - transapconstruction.be

    Fourth International Symposium on Block and Sublevel ... The growing popularity of caving methods around the world is largely due to the very low production cost and the intrinsic safety associated with the mining approach.